RIBBON CLAMP PLATES AND HARDWARE ONLY! PACK, RIBBON CABLE, ETC NOT INCLUDED!
Please read HasLab note below!
Aluminum clamping plates and hardware for attaching ribbon cable to the cyclotron. Please be sure to pick correct size!
- Set of 1/16" thick aluminum clamp plates
- Set of #8 x 3/4" socket screws, washers and nuts
- Plates may have slightly sharp edges and will require minor sanding to smooth out
- All kits require drilling new 3/16" holes for mounting - requires modification of pack. Spirit Packs require cutting off existing stand-offs and drilling new holes.
Plates were designed for specific packs but may work for yours based on diameter of OUTER ring of Cyclotron. Be sure to measure the outer, step-down ring on cyclotron - NOT the main cyclotron shell!
FULL SIZE - approximately 3.25" x .86" - meant for full size/movie packs with 10.25" diameter cyclotron outer ring.
HASLAB NOTE - the Full Size clamp technically fits the HasLab pack BUT I can't advise on how it would attach due to the existing HasLab clamp mechanism
SPIRIT LIFE-SIZE - approximately 3.8" x 1.1" - meant for Spirit Life-Size pack with 9.75" diameter cyclotron outer ring. No installation directions at this time - drill 3/16" holes for screws. For Spirit packs you will need to cut off existing screw standoffs and drill new holes. Position new clamp so it covers original screw holes. The clamp is made to be as close to original movie size as possible, so will JUST cover the old holes.
SPIRIT 80% SCALE - approximately 3.4" x 1" - meant for Spirit 80% Scale pack with 8.5" diameter cyclotron outer ring. No installation directions at this time - drill 3/16" holes for screws. For Spirit packs you will need to cut off existing screw standoffs and drill new holes. Position new clamp so it covers original screw holes.
No installation directions at this time - drill 3/16" holes for screws. For Spirit packs you will need to cut off existing screw standoffs and drill new holes. Position new clamp so it covers original screw holes.
RIBBON CLAMP PLATES AND HARDWARE ONLY! PACK, RIBBON CABLE, ETC NOT INCLUDED!